MarEng 307 is a standard diesel engine lubricant formulated with quality base oil and well proven additives. The TBN of 7 mg/KOH/g provides the level of detergency needed to accommodate the condition found in traditional trunk piston marine diesel engines and effect of burning poorer quality distillate fuels.

• Good thermal stability
• Good detergent properties at high temperatures.
• Good wear protection.
• Good dispersing properties at low temperatures.
• Good oil frame at extreme pressure.
• Excellent water resistance.
• Excellent filtration capacity.
• Excellent capacity for centrifuging and for separating out water and insoluble.
• Very good BN stability.

Care and Handling

• Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

Packing and Storage

• Supplied in bulk and drum of approximately 210 liters. Ensure drums are tightly re-sealed after use.
• All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum marking.
• Product should not be stored above 60°C, exposed to hot sun or freezing condition.

MarEng 309 is a standard diesel engine lubricant formulated with quality base oil and well proven additives. The TBN of 9 mg/KOH/g provides the level of detergency needed to accommodate the condition found in traditional trunk piston marine diesel engines and effect of burning poorer quality distillate fuels.

• Good thermal stability
• Good detergent properties at high temperatures.
• Good wear protection.
• Good dispersing properties at low temperatures.
• Good oil frame at extreme pressure.
• Excellent water resistance.
• Excellent filtration capacity.
• Excellent capacity for centrifuging and for separating out water and insoluble.
• Very good BN stability.

Care and Handling

• Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

Packing and Storage

• Supplied in bulk and drum of approximately 210 liters. Ensure drums are tightly re-sealed after use.
• All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum marking.
• Product should not be stored above 60°C, exposed to hot sun or freezing condition.

MarEng 3012 is a standard diesel engine lubricant formulated with quality base oil and well proven additives. The TBN of 12 mg/KOH/g provides the level of detergency needed to accommodate the condition found in traditional trunk piston marine diesel engines and effect of burning poorer quality distillate fuels.

• Good thermal stability
• Good detergent properties at high temperatures.
• Good wear protection.
• Good dispersing properties at low temperatures.
• Good oil frame at extreme pressure.
• Excellent water resistance.
• Excellent filtration capacity.
• Excellent capacity for centrifuging and for separating out water and insoluble.
• Very good BN stability.

Care and Handling

• Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

Packing and Storage

• Supplied in bulk and drum of approximately 210 liters. Ensure drums are tightly re-sealed after use.
• All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum marking.
• Product should not be stored above 60°C, exposed to hot sun or freezing condition.

MarEng 3015 is a standard diesel engine lubricant formulated with quality base oil and well proven additives. The TBN of 15 mg/KOH/g provides the level of detergency needed to accommodate the condition found in traditional trunk piston marine diesel engines and effect of burning poorer quality distillate fuels.

• Good thermal stability
• Good detergent properties at high temperatures.
• Good wear protection.
• Good dispersing properties at low temperatures.
• Good oil frame at extreme pressure.
• Excellent water resistance.
• Excellent filtration capacity.
• Excellent capacity for centrifuging and for separating out water and insoluble.
• Very good BN stability.

Care and Handling

• Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

Packing and Storage

• Supplied in bulk and drum of approximately 210 liters. Ensure drums are tightly re-sealed after use.
• All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum marking.
• Product should not be stored above 60°C, exposed to hot sun or freezing condition.

MarEng 3017 is a standard diesel engine lubricant formulated with quality base oil and well proven additives. The TBN of 17 mg/KOH/g provides the level of detergency needed to accommodate the condition found in traditional trunk piston marine diesel engines and effect of burning poorer quality distillate fuels.

• Good thermal stability
• Good detergent properties at high temperatures.
• Good wear protection.
• Good dispersing properties at low temperatures.
• Good oil frame at extreme pressure.
• Excellent water resistance.
• Excellent filtration capacity.
• Excellent capacity for centrifuging and for separating out water and insoluble.
• Very good BN stability.

Care and Handling

• Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

Packing and Storage

• Supplied in bulk and drum of approximately 210 liters. Ensure drums are tightly re-sealed after use.
• All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum marking.
• Product should not be stored above 60°C, exposed to hot sun or freezing condition.

MarEng 3030 is a multifunctional crankcase lubricant for highly rated medium speed diesel engines operating on residual fuel. MarEng 3030 is designed for conditions of moderate oil stress.

• Good thermal stability
• Good detergent properties at high temperatures.
• Good wear protection.
• Good dispersing properties at low temperatures.
• Good oil frame at extreme pressure.
• Excellent water resistance.
• Excellent filtration capacity.
• Excellent capacity for centrifuging and for separating out water and insoluble.
• Very good BN stability.

Care and Handling

• Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

Packing and Storage

• Supplied in bulk and drum of approximately 210 liters. Ensure drums are tightly re-sealed after use.
• All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum marking.
• Product should not be stored above 60°C, exposed to hot sun or freezing condition.

MarEng 4010 is a standard diesel engine lubricant formulated with quality base oil and well proven additives. The TBN of 10 mg/KOH/g provides the level of detergency needed to accommodate the condition found in traditional trunk piston marine diesel engines and effect of burning poorer quality distillate fuels.

• Good thermal stability
• Good detergent properties at high temperatures.
• Good wear protection.
• Good dispersing properties at low temperatures.
• Good oil frame at extreme pressure.
• Excellent water resistance.
• Excellent filtration capacity.
• Excellent capacity for centrifuging and for separating out water and insoluble.
• Very good BN stability.

Care and Handling

• Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

Packing and Storage

• Supplied in bulk and drum of approximately 210 liters. Ensure drums are tightly re-sealed after use.
• All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum marking.
• Product should not be stored above 60°C, exposed to hot sun or freezing condition.

MarEng 4012 is a standard diesel engine lubricant formulated with quality base oil and well proven additives. The TBN of 12 mg/KOH/g provides the level of detergency needed to accommodate the condition found in traditional trunk piston marine diesel engines and effect of burning poorer quality distillate fuels.

• Good thermal stability
• Good detergent properties at high temperatures.
• Good wear protection.
• Good dispersing properties at low temperatures.
• Good oil frame at extreme pressure.
• Excellent water resistance.
• Excellent filtration capacity.
• Excellent capacity for centrifuging and for separating out water and insoluble.
• Very good BN stability.

Care and Handling

• Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

Packing and Storage

• Supplied in bulk and drum of approximately 210 liters. Ensure drums are tightly re-sealed after use.
• All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum marking.
• Product should not be stored above 60°C, exposed to hot sun or freezing condition.

MarEng 4015 is a standard diesel engine lubricant formulated with quality base oil and well proven additives. The TBN of 15 mg/KOH/g provides the level of detergency needed to accommodate the condition found in traditional trunk piston marine diesel engines and effect of burning poorer quality distillate fuels.

• Good thermal stability
• Good detergent properties at high temperatures.
• Good wear protection.
• Good dispersing properties at low temperatures.
• Good oil frame at extreme pressure.
• Excellent water resistance.
• Excellent filtration capacity.
• Excellent capacity for centrifuging and for separating out water and insoluble.
• Very good BN stability.

Care and Handling

• Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

Packing and Storage

• Supplied in bulk and drum of approximately 210 liters. Ensure drums are tightly re-sealed after use.
• All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum marking.
• Product should not be stored above 60°C, exposed to hot sun or freezing condition.

MarEng 4017 is a standard diesel engine lubricant formulated with quality base oil and well proven additives. The TBN of 17 mg/KOH/g provides the level of detergency needed to accommodate the condition found in traditional trunk piston marine diesel engines and effect of burning poorer quality distillate fuels.

• Good thermal stability
• Good detergent properties at high temperatures.
• Good wear protection.
• Good dispersing properties at low temperatures.
• Good oil frame at extreme pressure.
• Excellent water resistance.
• Excellent filtration capacity.
• Excellent capacity for centrifuging and for separating out water and insoluble.
• Very good BN stability.

Care and Handling

• Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

Packing and Storage

• Supplied in bulk and drum of approximately 210 liters. Ensure drums are tightly re-sealed after use.
• All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum marking.
• Product should not be stored above 60°C, exposed to hot sun or freezing condition.

MarEng 3030 & MarEng 4030 is a multifunctional crankcase lubricant for highly rated medium speed diesel engines operating on residual fuel. MarEng 4030 is designed for conditions of moderate oil stress.

• Good wear performance.
• Good thermal & anti-oxidation stability.
• Excellent anti-foam properties.
• Tolerant to water contamination.
• Rapid neutralization of acidic combustion products gives long term protection against corrosion of ferrous and non-ferrous metals.
• Suitability for centrifugal separators high detergency/low detergency formulation releases contaminates and water readily in centrifugal separator.
• Marine engine reduction gears and certain other shipboard applications, where specialist lubricants are not required.

Care and Handling

• Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

Packing and Storage

• Supplied in bulk and drum of approximately 210 liters. Ensure drums are tightly re-sealed after use.
• All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum marking.
• Product should not be stored above 60°C, exposed to hot sun or freezing condition.

MarEng 4050 is a multifunctional crankcase lubricant for highly rated medium speed diesel engines operating on residual fuel. MarEng 4050 is designed for conditions of moderate oil stress.

• Good wear performance.
• Good thermal & anti-oxidation stability.
• Excellent anti-foam properties.
• Tolerant to water contamination.
• Rapid neutralization of acidic combustion products gives long term protection against corrosion of ferrous and non-ferrous metals.
• Suitability for centrifugal separators high detergency/low detergency formulation releases contaminates and water readily in centrifugal separator.
• arine engine reduction gears and certain other shipboard applications, where specialist lubricants are not required.

Care and Handling

• Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

Packing and Storage

• Supplied in bulk and drum of approximately 210 liters. Ensure drums are tightly re-sealed after use.
• All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum marking.
• Product should not be stored above 60°C, exposed to hot sun or freezing condition.

MarEng 4055 is a multifunctional crankcase lubricant for highly rated medium speed diesel engines operating on residual fuel. MarEng 4055 is designed for conditions of moderate oil stress.

• Good wear performance.
• Good thermal & anti-oxidation stability.
• Excellent anti-foam properties.
• Tolerant to water contamination.
• Rapid neutralization of acidic combustion products gives long term protection against corrosion of ferrous and non-ferrous metals
• Suitability for centrifugal separators high detergency/low detergency formulation releases contaminates and water readily in centrifugal separator.
• Marine engine reduction gears and certain other shipboard applications, where specialist lubricants are not required.

Care and Handling

• Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

Packing and Storage

• Supplied in bulk and drum of approximately 210 liters. Ensure drums are tightly re-sealed after use.
• All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum marking.
• Product should not be stored above 60°C, exposed to hot sun or freezing condition.